steventoon
Member
- Posts
- 33
Hi,
Just after some advice. i've bought a new head from Turners as my existing one is knackered. The turners head comes with the valves already fitted. (My car is a TD5 2003 16P engine)
I'm in the process of moving everything over from my old head and have trial fitted the camshaft. However the camshaft is not sitting properly in the housing as a couple of the cams are hitting the roller rocker arms. Can anybody please give me some advice on how to fit the camshaft. Does the camshaft carrier pull the camshaft into position when it is torqued up? This is the first time I've tackled a job like this.
Regards
Steve
Just after some advice. i've bought a new head from Turners as my existing one is knackered. The turners head comes with the valves already fitted. (My car is a TD5 2003 16P engine)
I'm in the process of moving everything over from my old head and have trial fitted the camshaft. However the camshaft is not sitting properly in the housing as a couple of the cams are hitting the roller rocker arms. Can anybody please give me some advice on how to fit the camshaft. Does the camshaft carrier pull the camshaft into position when it is torqued up? This is the first time I've tackled a job like this.
Regards
Steve
Last edited: