fencing wagon truck cab set up..

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
why did you rule out a hi-cap BoB?

Only askin as im selling me 90 so i can buy one but i have a few wants. Like i want it to be white and i want it to be a 200 or 300.

What was your budget if you dont mind sayin?

Ta
 
BIG_GINGA_BEARD said:
why did you rule out a hi-cap BoB?

Only askin as im selling me 90 so i can buy one but i have a few wants. Like i want it to be white and i want it to be a 200 or 300.

What was your budget if you dont mind sayin?

Ta
Click to expand...
i dont want a 110 its too long ...

my conversion budget is zero so ill tot it up...

so its better the devil you know .......a trayback dropside pick up suits better for posts as i can then drop a pallet on the back with the tractor save loading by hand...the hicap butt is also a pain to get woodchip out of..flat tray is so much better.:)

todays task has been to work out the seatbelts,the series cab back i have has no mounts for the overshoulder fitting,
so i have a set of seatbelt mounts from the b-pillar on a disco 1 that im going to fit in somehow....probably bolt them to the cab then i can fit the belts to that,i do have the van side mounts to play with so be ok i think...

im also thinking a white roof and cab will help...
 
right then ive worked out the tray is 1.8 m x 1.4 m,so im now on the hunt for a trailer board bits,seen some on ebay i could cut down to size,the new fittings for dropside panels are expensive......
the tray will take fence posts just purrrfect and the rails can go on the over cab rail.

i also need a 6" box section and stays for the towbar extension,like the 130 hicap has...

anyone?.
 
so then I have disc brakes on a disco axle on the back.also the aframe thingy is present,

do i keep the stabaliser a frame thingy or remove it and wot weight springs can i fit i lost my spring chart.....

as it will be quite loaded i am thinking HD 110 hicap springs for the back however the fuel tank is under cab rather than centre so can i fit springs the same on the back or do they have to be side relevant?
 
this is what i have a pair of.....
NRC2119
863.00 load
150.00 rate
2678.70 rate kgs
GREEN
409.70 length mm
16.13 length inch
7.63 no of coils
DISCO TDI FRONT TO HA475972 RR Carb HD front


will they fit these as rear pick up 90 springs??
NRC9463
531.97 load
127.33 rate
2273.75 rate kg
GREEN-YELL-WHIT
376.27 length mm
14.81 length spring
9.00 no of coils
90 REAR PASSENGER HD


NRC9462
631.97 load
225.09 rate
4019.46 rate kg
GREEN-YELL-RED
387.57 length mm
15.26 length "
9.00
90 REAR DRIVER HD
 
Last edited:
well got all the seals etc stripped and the curved glass refitted to the cab bak today,rub down in the morning then paint it by lunch,

fitting the curved windows in the truck cab is a tw@t of a job,still the alloy side button catches on the rear glass that slides still move....the cab i got from a series is nice...

get that rubbed down and painted along with roof beating tomoz......
 
You must log in or register to reply here.

Similar threads

B
90 truck cab to station wagon advice
Replies
3
Views
1K
Bazzworx
B
K
What money should I be asking?
2
Replies
20
Views
895
Atomician
Atomician
SPLRover
Brakes & Suspension & Wiring Recommendations - 1988 90 Restoration
2
Replies
36
Views
3K
Chalky.
Chalky.
ryan_1993
Understanding a few 1990s Land Rover Trim/Options for the CSW (Research)
Replies
11
Views
1K
Stevetheplant
S
border
Truck Cab rear Window,
Replies
5
Views
1K
nathanglasgow
N
Back
Top