fencing wagon truck cab set up..

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
No you cant ;) I can as my truck cab is made up of van sides cut up to length :)


You've done yours with the actual truck cab unlike this





B00385E5-E241-4935-9D16-95071474DF23-4543-00000379E7D5D37A.jpg



875A3402-CF62-4070-A818-C0F33C4B1993-4543-00000379B7330655.jpg



6E6CB231-4B03-4D9A-A3A8-FC95CC19C937-7570-000007E4C4E59A94_zps9a5b58fe.jpg
 
MoorlandBOB said:
na that looks gash with flat windows.the whole point of a truck cab is the curved window and the visability,ya killed the sideways view with that..:p

n i aint yer mate:p:p:p:p:fencing:

pm me yer post code and ill find out..:)
Click to expand...

Fine I'll change my post :p


I have mirrors for visibility ;) better than a van anyway and I has cut the sides long enough to get those mini sliding windows in there ;)


PM inbound
 
I did some measuring earlier ;) 57 7/8th is the width of the roof on a 110 van, which is the same as a series

Only difference being length and in your case for the series to fender mounting the bulkhead bolts are somewhere different for some of them but you don't need all :) I sold my truck cab roof for £140 IIRC
 
yep,i have only 2 bolts that line up,the ones by the b.pillar.

i have made some spacers and will be fitting them this weekend,
also the seat belts are an issue,I may have to post pics up of that,i have a plan that is good i hope.

The other issues are the door seals.the series truck cab back has a rivet on seal and the metal strip angle the seal fits too has a 90 on it...

so i cold formed the lip flaton the series cab section to line up with the defender strips giving a good strong round edge to push the defender door seal onto.I just got a lump and tap hammer then formed the edge overbetween the two hammers ,seems ok ...no cracks...

Thats it really the door seals seem a good fit

all the roof bolts lined up fine and thats a defender roof and series cab back...
 
right up and running..

front nato hitch to fit next weekend.I can now sort the rear tub cageing which i just have to pick up from the yard,im hopeing to use the hoop holes for the cage mountings.

cage and hitch by end of next weekend then i can respray..I dont have time to make the tray back yet so going with the existing tub,
 
BIG_GINGA_BEARD said:
[smile]pictures or it didnt happen :p[/smile]

[smile]You knows the rules :D[/smile]
Click to expand...

lol

fek arf its a truck cab..:p:p:p:p:p

tell yer wot tho took fekin ages ,the volvo seats are electric so to fit them i had to remove the drive for the tilt and calibrate two in each seat,took all day ffs...i aint even got em wired in just in .....:mad::mad::mad::mad:


...so now im drinkin fuk it....it goes to work tomoz for the next 10 days lol..:beer2::D

best bit is the sheep need a 5 hrs shift so i can spend the othe 3 hrs in farm workshop doing under body stripo n seal...i take the diff guards off every year for clean out.

when its caged out i will post pics..tho it was nice to park in supermarket with a 90 pick up ..i could atchually see what i was reversing into lol..:D
 
You must log in or register to reply here.

Similar threads

B
90 truck cab to station wagon advice
Replies
3
Views
1K
Bazzworx
B
K
What money should I be asking?
2
Replies
20
Views
1K
Atomician
Atomician
SPLRover
Brakes & Suspension & Wiring Recommendations - 1988 90 Restoration
2
Replies
36
Views
3K
Chalky.
Chalky.
ryan_1993
Understanding a few 1990s Land Rover Trim/Options for the CSW (Research)
Replies
11
Views
1K
Stevetheplant
S
border
Truck Cab rear Window,
Replies
5
Views
1K
nathanglasgow
N
Back
Top