Disco 2 Facelift rear lights into pre facelift

Rushjob · Sep 14, 2020

Hi all, I've got a set of facelift rear lights en route as most of mine are cracked so it's the ideal time to swap them. Does anyone have a wiring diagram / guide to the easiest way to swap over or do I need to get the circuit diagrams out.TIA

sierrafery · Sep 14, 2020

You have to replace the bumper lamps too in that case and reroute the circuits between indicators and reverse lights cos facelift has the indicators in the tail lamp and reverse in bumper

Rushjob · Sep 14, 2020

sierrafery said:
You have to replace the bumper lamps too in that case and reroute the circuits between indicators and reverse lights cos facelift has the indicators in the tail lamp and reverse in bumper

Thanks I'm aware of that and have all four lights on the way.....

Europa486 · Sep 14, 2020

I have left the original lamps in the body and put the slightly later bumper with lights on the back,
Then it’s straightforward to continue from your existing wiring down to the bumper,
This will give you a double up on brake and indicator and with the right bulb holder extra side lights,

Europa486 · Sep 14, 2020

Sorry I thought you were talking about the MK1 to the facelift MK1

discool · Sep 14, 2020

Stanleysteamer · Sep 14, 2020

Europa486 said:
I have left the original lamps in the body and put the slightly later bumper with lights on the back,
Then it’s straightforward to continue from your existing wiring down to the bumper,
This will give you a double up on brake and indicator and with the right bulb holder extra side lights,

Nice!

Stanleysteamer · Sep 14, 2020

If in doubt, get hold of a bit of trailer cable and use what you need from it!

Disco 2 Facelift rear lights into pre facelift

Rushjob

Active Member

sierrafery

Well-Known Member

Rushjob

Active Member

Europa486

Well-Known Member

Europa486

Well-Known Member

discool

Well-Known Member

Stanleysteamer

Well-Known Member

Stanleysteamer

Well-Known Member

Similar threads