Facelift kit?

Hello where can I buy a facelift kit for my l322 range rover hope u can help

Hi Brian

Welcome to the forum, there are people on EBay that will supply and fit it for you if you want, hope this helps.

Cheers Kaz

2.0 Hippo on here has done his twice i think, will probably be along shortly to advise.

martynv8 said:

2.0 hippo on here has done his twice i think, will probably be along shortly to advise.

Click to expand...

+1, also put your location in might be somewhere local,there is someone close to me doing them £3500 all in I think,look stunning & was tempted but im prob only keeping mine another 2 years so it wont be worth nothing then

Ask my missus, she's had a few

If you ok with spanners theres loads on ebay
Even if your not I would still source them from there then have a bodyshop fit/paint it

gfromleeds said:

If you ok with spanners theres loads on ebay
Even if your not I would still source them from there then have a bodyshop fit/paint it

Click to expand...

I'll tell the missus

gfromleeds said:

If you ok with spanners theres loads on ebay
Even if your not I would still source them from there then have a bodyshop fit/paint it

Click to expand...

spanners ??? lol

more like good with the angle grinder.

also need to be on top of your electrical knowledge.

there are companies that can sell you a kit.

either fully fitted or just as parts.

theres alot more to it then just the parts in the kit.

you would need to get round the wiring (which i sorted myself with some clever electricary... and with the help of the programming features on my faultmate extreme)

otherwise you will need to purchase the wiring kits and have pay for an auto electrician to install.


wouldn't attempt fitting this yourself unless your good with your tools and have a good idea on whats involved.


hope that helps

I am handy with cars fitted lots of engines and fitted different looms in to different cars just need to find a kit to buy I live in essex can anyone guide me in the right direction

http://pages.ebay.com/link/?nav=item.view&id=221324135346&globalID=EBAY-GB

Then sell your stuff to recoup some costs

http://pages.ebay.com/link/?nav=item.view&id=291026562911&globalID=EBAY-GB

Are you after a 2006 supercharged look facelift or a 2010 onwards facelift ?

As there's a big difference in cost and installing !

I'm looking at doing the 2010 facelift to my 2003 HSE. I've sourced parts on EBay. Headlights £437 each. Grill £105. Headlight connectors £72. Front and rear bumpers with side grills etc £360. The car will be getting re wrapped but the bumpers are in the white wee going for.
You say a grinder is required? Is this for the headlamps to fit?

Yes a bit of body work is needed with the use of a grinder to get everything to fit nicely.

Why did you buy a new 2010 bumper ? As the standard 2010 bumper is the same as the early ones fitted to all L322's

Best thing to do is just leave the poor bloody thing alone.

wammers said:

Best thing to do is just leave the poor bloody thing alone.

Click to expand...

Why ?

2.0_hippo said:

Why ?

Click to expand...

Because i said so.

I saw a kit for doing the back to match on eBay a couple of weeks ago but I can't find it now..

blackstrat said:

I saw a kit for doing the back to match on eBay a couple of weeks ago but I can't find it now..

Click to expand...

Yes I know the one.

Around £1,200 for the back end minus the lights last time I bought mine

2.0_hippo said:

Yes a bit of body work is needed with the use of a grinder to get everything to fit nicely.

Why did you buy a new 2010 bumper ? As the standard 2010 bumper is the same as the early ones fitted to all L322's

Click to expand...

I thought the early bumpers are straight along the top and the 2010 have the dip in the middle where the grill sits?

regarding the grinder, if you can find wheeler dealers where they face lifted an early l322 you can see ed taking a grinder to the front wings to remove a thin slice to allow the lights to sit back