Face lift kit
- Thread starter Kieran725
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Skinny Mike
Well-Known Member
- Posts
- 2,910
Yes. Plenty have. Have a search, there's quite a few threads.
If your lucky one of the guys will say how they did it.
Mike
If your lucky one of the guys will say how they did it.
Mike
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
I've been wanting to do this for some time. Annoyingly the parts needed command silly prices. Front bumpers and head lights in particular are crazy money.
I would think its too hard to swap the bits over. Might need to pickup the connectors for the headlight wiring as I believe the lamps are different in the facelift.
I've got a Facelift front bumper that's surplus to requirements. It's black, but will need a paint as there's a few cosmetic scratches here and there.
Fog light holes are open but there's no bezels or lights. £70 posted or £50 collected (Woking or Gatwick).
I've got a Facelift front bumper that's surplus to requirements. It's black, but will need a paint as there's a few cosmetic scratches here and there.
Fog light holes are open but there's no bezels or lights. £70 posted or £50 collected (Woking or Gatwick).
Hi Nodge.
Do you know What other parts are needed for it. Other than the bumper of corse.
It would be good to know.
Kind regards.
Kieran
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
my understanding is its a piece of pee to do, bumper and headlights and thats about it.
bit of rewiring (i had to do the same when i did the facelift on my mgf to mgtf spec) and bash the headlight mounting holes in with a hammer.
bit of rewiring (i had to do the same when i did the facelift on my mgf to mgtf spec) and bash the headlight mounting holes in with a hammer.
Hi Platty thanks mate I will get back to you on that I am up in the north of Scotland. Bit from time to time I come down to see my mum in Arborfield.
Kind regards
Kieran.
RealBeale
Active Member
- Posts
- 532
- Location
- Birmingham
Well I just happen to have a plug'n'play loom if anyone's interested. And some pics of what to cut out.
