anyone help i have a series three landy fitted with a 2.5 diesel i m told out of a early 90 problem is exhaust gone at back box phoned paddocks up they say its a different exhaust to the standard 2 25 it looks the same to me a 3 fitting manifold studs i was going to replace full exhaust with a 2.25 they say no ? thanks dave
exhaust
- Thread starter massa
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
w3526602
Active Member
- Posts
- 172
- Location
- South Wales
Hi,
I think Steve Parker Land Rovers (Google) does special exhausts.
Look in you free-advertiser, you should find somebody who will make you a complete exhaust ..... drive in - drive out.
If you have a turbo, you do not actually NEED a silencer. I have a S2TD with about 6ft of pipe, ending in front of N/S rear wheel. Wife complains that it is a bit noisy, but I can hear her complaining, so it can't be that bad.
602
I think Steve Parker Land Rovers (Google) does special exhausts.
Look in you free-advertiser, you should find somebody who will make you a complete exhaust ..... drive in - drive out.
If you have a turbo, you do not actually NEED a silencer. I have a S2TD with about 6ft of pipe, ending in front of N/S rear wheel. Wife complains that it is a bit noisy, but I can hear her complaining, so it can't be that bad.
602
fenby1976
New Member
- Posts
- 1,036
- Location
- West Wales
I've heard that the 2 1/4 diesel exhaust manifold will bolt onty the 2.5 diesel cylinder head for a 90/110. Is yours non turbo? You may already have one of these manifolds in place with a standard 2 1/4 diesel exhaust system. If you post up some photos we'll be able to tell you what you've got.
Similar threads
