v8hybrid
New Member
- Posts
- 12
- Location
- Stevenage, Herts.
Wasted 5 hours today trying to reinstate the air springs after the previous owner had put coils on. Air springs went on ok, and compressor runs under command (pump relay) of Nanocom, but no air to springs- tried it with valves 'on' and 'off'. Also, even with all doors & bonnet shut, the compressor did not turn on with the ignition, only under command of Nanocom. Oh- just thought- could it have needed the engine running? Others said just ignition in their posts.
Anyway, coils are back on for now, pending further investigation. Nice new air lines run to the springs from the valve block, temporarily useless!
Also took (angle ground) off the SLS compressor- another blindingly short-sighted decision by LR- brilliant way of mounting the module- spoilt by using steel bolts into brass nuts moulded into soft plastic.... Anyway, it's off for investigation.
I need to find out exactly what the different options on the Nanocom SLABS menus do. Anybody know what the menu options do/can point a finger to a resource please?
Anyway, coils are back on for now, pending further investigation. Nice new air lines run to the springs from the valve block, temporarily useless!
Also took (angle ground) off the SLS compressor- another blindingly short-sighted decision by LR- brilliant way of mounting the module- spoilt by using steel bolts into brass nuts moulded into soft plastic.... Anyway, it's off for investigation.
I need to find out exactly what the different options on the Nanocom SLABS menus do. Anybody know what the menu options do/can point a finger to a resource please?
yes
