engineers report on mods?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Karlos28

Karlos28

Well-Known Member
Posts
1,894
Location
Derbyshire
hi there, have been working on a tipper bed made from a transit bed on my mates 110. he rang the insurance company and they said he needs an engineers report?? what the hell is one of those and what is the point!!? im an engineer, can i write it!?
any help appreciated,
cheers
karl
 
Karlos28 said:
hi there, have been working on a tipper bed made from a transit bed on my mates 110. he rang the insurance company and they said he needs an engineers report?? what the hell is one of those and what is the point!!? im an engineer, can i write it!?
any help appreciated,
cheers
karl
Click to expand...

I think it is just to certify that everything has been done correctly. If it is your friends land rover and you have your own / work for an engineering firm, you should be able to write a report for him just explaining that you have examined the vehicle for structural integrity and safety etc. On the other hand, take it to your local landy specialists and give them a tin of biscuits for a piece of paper with their logo and address on it and then ask who ever is in charge to write a quick paragraph explaining that the vehicle has been checked and all is okay.

-Tom
 
i think its ridiculous! if it passes an mot then its fine! load of bollocks if you ask me. might see if he wants to call into a landy place to see if they will give it a once over!
 
ratty said:
Oooooh. Talking of ****ing yerself..... Evening slobber chops. Have ya just woken up in a fresh puddle?:rolleyes::p
Click to expand...

just got in achuly :rolleyes:
been over to jamie's to help him finish off putting his enjin back together :doh::D
did'nt know what the bottom pulley looked like on the fone :doh: so discribed it to him and thought better pop over , just as well i did he could'nt get the viscose back on turns out he'd only put the waterpump pulley on back to front :hysterically_laughi
 
buckshot said:
just got in achuly :rolleyes:
been over to jamie's to help him finish off putting his enjin back together :doh::D
did'nt know what the bottom pulley looked like on the fone :doh: so discribed it to him and thought better pop over , just as well i did he could'nt get the viscose back on turns out he'd only put the waterpump pulley on back to front :hysterically_laughi
Click to expand...
:doh::D

Has he got it running yet?
 
ratty said:
:doh::D

Has he got it running yet?
Click to expand...

yeah turned out it was the tappets screwed down too tight and the cam belt 1 knotch off correct :doh: (former not thier fault latter was)
we got it all squared away bar the air box and fired up and ran sweet off the mark.
 
You must log in or register to reply here.

Similar threads

S
Defenders Vs Insurers tomfoolery
Replies
1
Views
4K
lightning
lightning
O
Disco 3 (LR3) Air Conditioner on Discovery III TDV6 S 2006
Replies
9
Views
2K
ObjectiveGr
O
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
3K
stuu
stuu
A
Picking up 110 SW soon, confused by insurance
Replies
4
Views
1K
amenjet
A
stumpyj
Bulkhead Vent replacement
Replies
15
Views
3K
stumpyj
stumpyj
Back
Top