Engine transplants into P38's
- Thread starter JonGM
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,011
- Location
- Near Poitiers SW France
BMW 2.5 from Omega or BMW. BMW 3.0 from BMW530 probably many others but the BMW 2.5 is an original fitment so all the bits should be available and it's ECU will talk to the BECM. Can be chipped up to 180 Bhp, loads of torque, economical etc
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
the 2.5 is also pretty cheap if bought as a donor omega!!!
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
Other engines have been done (Corvette V8's, BMW 3.0, 3.5 diesels) but anything other than a 2.5 BMW is a royal pain in the ass unless you're a whizz kid at system integration
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
I forgot about the fabled BMW 5.0L V12 installation reportedly done by LR as a mule. I've seen spy shots in old mags. i think I remember the front being a bit longer tha standard.
Now that would be sweet and again 750 beemers are bound to be going cheap at this stage.
Anyone with any solid info on this or was it an L322 mule that was photo'd instead?
Now that would be sweet and again 750 beemers are bound to be going cheap at this stage.
Anyone with any solid info on this or was it an L322 mule that was photo'd instead?
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
omega engine fits but puts out 160 bhp as standard.
what does the LR version put out?? ive googled and got from 113 to 138 bhp????? if thats the case the omega should be just as good as a chipped lr version!!!
i'm calling in at a place just outside salford tomorrow!!! i'll shout and maybe you'll hear me john!!!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
what place,what time gav,pm me.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
two different power outputs on the p83 2.5 t/diesel,first try by l/rover was crap second try was less crap.:doh:
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
gav can you have a look see if they have a v8 4.0 iam being quoted £1200 second hand i can get a new one for that thanks j
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
rrp38x500
New Member
- Posts
- 6
- Location
- bournemouth
hi if your interested im having a 3.0 bmw engine fitted at the moment nick
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
:nopics::behindsofa:
