Engine Probs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
metallicachick86

metallicachick86

New Member
Posts
1,308
Location
Bury, Lancashire
Right, theres a weird popping noise coming through the engine and out the filter. Its a 2.25 petrol. And it sounds bloody horrible. Its 'in time' with the engine running. Any ideas? We've sured up all the manifold gasket and exhaust so we dont think its drawing air in.

Cheers all.
 
metallicachick86 said:
Right, theres a weird popping noise coming through the engine and out the filter. Its a 2.25 petrol. And it sounds bloody horrible. Its 'in time' with the engine running. Any ideas? We've sured up all the manifold gasket and exhaust so we dont think its drawing air in.

Cheers all.
Click to expand...

Wouldn't be an inlet valve a bit tight would it, tappets!!
 
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

overhead cam on a series....

HAHAHAHAHAHAHAHAHAHAHAHAHHAHAHA

SHIMS......


HAHAHAHAHAHAHAHAHAHAHAHAHA.

Its block mounted cam with push rods and rollers and a rocker shaft and rockers and nuts and adjustment bolts.



it could also be a broken cam roller - they are prone to that.
 
if its tappet adjustment - yup piece of poo - an hours job - dontforget to replace the rocker gasket. If its the rollers - then its ahead=orf job - meant to be easy , but to replace the lot will be circa a ton (£100). yu can get another injun fur about that. Its yo choice.
 
next to the exhaust valve..



and the next exhaust valve.

and the next exhaust valve


and
.......

there is 8 inlet and 8 exhaust valves mounted in the head;).
 
The Mad Hat Man said:
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

overhead cam on a series....

HAHAHAHAHAHAHAHAHAHAHAHAHHAHAHA

SHIMS......


HAHAHAHAHAHAHAHAHAHAHAHAHA.

Its block mounted cam with push rods and rollers and a rocker shaft and rockers and nuts and adjustment bolts.



it could also be a broken cam roller - they are prone to that.
Click to expand...

I dunt know why but I thought some of them things had the old rover injun fitted, the 200tc beastie. Oh well, I'll go un have a cupa I fink.
 
tah. will keep in mind.

Just out of curiosity. How heavy is an engine? (dont laugh) cos if i need to come pick one up, i need to know if i can (struggle) to put it in back of disco, or will i need a trailer? (and straps etc)
 
You must log in or register to reply here.

Similar threads

T
Series 3 New "ticking" noise upon acceleration (in gear only)
Replies
5
Views
494
boguing
boguing
Tim_AM
S3 bogging on full throttle
Replies
2
Views
82
tottot
tottot
M
Whistling noise from engine?
Replies
6
Views
424
dag019
dag019
T
Clutch noise
Replies
13
Views
1K
Anaconda
A
E
Series 3 petrol extremely slow turning after electronic ignition fitted
Replies
4
Views
656
AllanWorms
AllanWorms
Back
Top