Stv123
Active Member
- Posts
- 501
- Location
- derbyshire
Anyone know the length and size of cable needed for the extra engine ground mod? (Winters here)
Freelander 2 (LR2) Engine earth mod
- Thread starter Stv123
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I used a 760mm long 25mm black starter cable, with a 6mm lug on one end (for the battery end) and a 10mm lug on the other (starter end).
I drilled a suitable hole in the bottom of the battery tray, then ran the wire between the spare 6mm thread on the neg clamp and the top starter securing bolt. I then cable tied the cable along the original harness for neatness.
Stv123
Active Member
- Posts
- 501
- Location
- derbyshire
Thank for that
Arctic2
Well-Known Member
- Posts
- 2,753
- Location
- Westmidlands
few photo in the thread below.
https://www.landyzone.co.uk/land-rover/fl2-xs-td4-e-economy-mode.359137/#post-4856978
https://www.landyzone.co.uk/land-rover/fl2-xs-td4-e-economy-mode.359137/#post-4856978
