Engine drops revs at 3000 revs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Kieron Riley

New Member
Posts
6
Location
Formby
hi my freelancer TD4 has started dropping in revs at about three thousand revs, I changed the air filter which was all but full ,and it stopped doing it for about three days but it has started again have any of you very knowledgable people any ideas as to the possible cause of this fault . Thanks, Kieron
 
The
What do you mean by "dropping revs at 3,000 Rpm"?
The engine seems to cut out but if I just let the car slow down and then put my foot down again it will go again until it reaches 3000 revs and then stalls again, this will happen at any speed it’s the 3000 that stalls it, thanks for reading my post and trying to help. Kieron
 
Your best bet is to look at the live data on a diagnostic device. You're issue sounds like a fuel related issue though. So you need to check the low pressure fuel pump supply pressure using low pressure sensor the live data.
 
Back
Top