Egr

martin c brown · Sep 14, 2014

Hi I have just fitted a EGR blanking plate and disconnect all pipes to it should the flap valve in the EGR stay open if not connected,or is it best to remove it all together

brian47 · Sep 14, 2014

Remove it all together.
A full EGR removal kit would include an extension tube for the inlet manifold.

discodrivercumbria · Sep 14, 2014

full kit and see how dirty the intercooler hose is! clean MAP sensor, usually very dirty if EGR was

Maaarrghk · Sep 14, 2014

Also a good idea to replace hoses with silicone if the ones on there have been on for a while, as standard hoses tend to de-laminate internally with age and cause a flow restriction.

martin c brown · Sep 15, 2014

Thanks for that will get the full kit and hoses

Maaarrghk · Sep 16, 2014

Be aware that on some hose kits, the one that goes into the turbo may need shortening. This is the case on kits from both Paddock and Derby Performance Hose. DPH do some rather nice wide stainless hose clips.

Egr

martin c brown

Member

brian47

Well-Known Member

discodrivercumbria

Well-Known Member

Maaarrghk

New Member

martin c brown

Member

Maaarrghk

New Member

Similar threads