Ian jones
Well-Known Member
- Posts
- 1,104
- Location
- north east england
Hi i am going to clean my EGR VALVE will i need a new seal or will i get away with the old one Also can i use white spirit to clean it thanx i j 
Egr valve seal
- Thread starter Ian jones
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
dazjam
Active Member
- Posts
- 503
- Location
- Burry Port
Apparently you can re-use but would be down to the condition of it of course. White spirit and bottle brush worked for me better than anything else I had to hand. I recommend some rubber gloves as a good idea!
Worth reading the thread a few times matey.
http://www.landyzone.co.uk/lz/f9/egr-blanking-mod-63948.html
Worth reading the thread a few times matey.
http://www.landyzone.co.uk/lz/f9/egr-blanking-mod-63948.html
Ian jones
Well-Known Member
- Posts
- 1,104
- Location
- north east england
Thankx for those sharp replies! i hope to do it this weekend i j
dazjam
Active Member
- Posts
- 503
- Location
- Burry Port
PM me if you neeed a piece of pipe and peg as i still have a meter of the stuff and 20 pegs
Ian jones
Well-Known Member
- Posts
- 1,104
- Location
- north east england
Did the deed on sat as advised the seal was ok what a dirty job, never been touched in 5 years it was pitted worth doing though thanx again i j
bonnybrook
Active Member
- Posts
- 424
Did the deed on sat as advised the seal was ok what a dirty job, never been touched in 5 years it was pitted worth doing though thanx again i j
I did mine sat - this is 2 1/2 yrs junk - and def wear gloves i'm still cleaning my hands :doh:
Attachments
dazjam
Active Member
- Posts
- 503
- Location
- Burry Port
