egr fitting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
E

engineer

New Member
Posts
166
my egr blanking kit for my 2000 td5 has arrived from td5 alive, very well constructed it is to, any particular pit falls to look out for and where is best to blank the vacuum pipe.

john:):)
 
by the plug end by the brake servo...i used a bolt & jubilee.
soak the bolts that come off the exhaust manifold in wd first-mine went tits & I had an hour with a stud extractor!
 
I've got mine to do sometime this week - I am pondering whether to reuse the bolts holding the pipe onto the exhaust manifold (assuming I dont snap the b*stards off when removing them). Any tips as to what size they are?

David
 
heres an update, bit the bullet and did it this morning, the cap heads on the exhaust manifold end are 5mm, the bolts on the egr itself are 8mm, and the bolt that holds down the centre bracket is 13mm, all mine undid after the wd soaking and the td5alive kit fitted beautifully, took her over to my brothers later on and a deffinate improvement.


john:):)
 
did you blank off the vacuum pipe?
i only ask as i have forgotten to do ine and its raining too much at the moment to finish it off.
 
indeed i did took it back as far as the clip on the cover fastening bracket blanked it there with a stainless no6 self tapper and some silicone sealent


john:):)
 
You must log in or register to reply here.

Similar threads

D
Egr delete
Replies
9
Views
652
Stanleysteamer
Stanleysteamer
R
Td5 late boost
Replies
18
Views
763
Rimas
R
bahteles
D2 Td5 - EGR Delete, should also remove vaccum solenoid?
Replies
4
Views
841
sierrafery
sierrafery
Gothicsera
Discovery 2 TD5 Lack of Power
2 3
Replies
46
Views
5K
Gothicsera
Gothicsera
U
Disco 2 Egr blank, broke coolant hose?
Replies
4
Views
2K
Ush
U
Back
Top