EGR bypass-kit, where to buy?

Hello

Where can I buy this. I cant find it on ebay. I have search after it "worldwide" but nothing there. I live in Norway.

Edit: I also need a crankcase breather....


Torsen

didnt look hard MG Rover Diesel EGR Blanking Kit on eBay, also, Rover MGF, Car Parts, Cars, Parts Vehicles (end time 13-May-09 17:28:49 BST) and he'll send it abroad

That's not the EGR bypass for the TD4 Freelander. There isn't one on ebay at this time
This is the cheapest Crankcase valve on ebay at the moment http://cgi.ebay.co.uk/Freelander-TD...3|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
Allan

AllanI said:

That's not the EGR bypass for the TD4 Freelander.
Allan

Click to expand...

Its a blanking kit.

blanking kit only prevents exhaust gasses being recirculated; bypass kit has no obstruction to airflow in the middle of the valve.

think you will find this is the correct item:

http://cgi.ebay.co.uk/Rover-75-MG-Z...9|66:2|65:12|39:1|240:1318|301:1|293:1|294:50

Optimus Prime said:

blanking kit only prevents exhaust gasses being recirculated; bypass kit has no obstruction to airflow in the middle of the valve.

think you will find this is the correct item:

Rover 75 / MG ZT Diesel EGR Bypass Valve with gasket on eBay, also, Rover MGF, Car Parts, Cars, Parts Vehicles (end time 11-May-09 18:08:18 BST)

Click to expand...

Must have missed that one :doh:

Allan

goonarmy said:

Its a blanking kit.

Click to expand...

Exactly & as Opti quite rightly pointed out, it's not a bypass kit is it, which is what was originally asked for.......................................................

Optimus Prime said:

blanking kit only prevents exhaust gasses being recirculated; bypass kit has no obstruction to airflow in the middle of the valve.

think you will find this is the correct item:

Rover 75 / MG ZT Diesel EGR Bypass Valve with gasket on eBay, also, Rover MGF, Car Parts, Cars, Parts Vehicles (end time 11-May-09 18:08:18 BST)

Click to expand...

Be carefull I brought one from this seller and when I came to fit it the exhaust blanking part did not line up in the right place and there was not enough movement on exhaust part to make it fit , The cork gasket is also crap , I ended up cleaning up the old valve and sealing the exhaust part with a metal disc for now

Hi
I wanted to dissable the egr to reduce the smoke after fitting a Synergy 2, all i did was remove the vacuum hose to the egr and blank the hose (i used a golf tee), this stops the valve opening. I don't think fitting a bypass kit will give much more airflow. However disconnecting the vacuum hose will only work if the valve seals shut and does not leak, if this is the case removal would be the best option.
Rich

richijones said:

Hi
I don't think fitting a bypass kit will give much more airflow.
Rich

Click to expand...

The original egr restricts the airflow by approximately 40% & that's providing it's nice, clean & shiny and not all gummed/sooted up.