Ecm

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JohnnyCrash

JohnnyCrash

New Member
Posts
1,917
Hi

My replacement ecm came today and when I went to fit it I found the Gate that holds the connector in place is a mirror image, so it will not fit?


 
can I not just modify the connector on the loom to take the other ECM as I don't have the EGR connected??

or would this just be too simple??
 
JohnnyCrash said:
can I not just modify the connector on the loom to take the other ECM as I don't have the EGR connected??

or would this just be too simple??
Click to expand...
You would need to fit the IAT to the inlet manifold, and there are other wiring differences I think, I would need to do a side by side wiring comparison to be sure.
 
Datatek said:
I hear the sound of someone digging:rolleyes:
Click to expand...

No one digging at all. Don,t get paranoid. Just easier to get the correct unit than **** about changing a wiring loom and adding the temp sensor. The ECU expects to see certain things if it didn't see them it would get confused.
 
wammers said:
No one digging at all. Don,t get paranoid. Just easier to get the correct unit than **** about changing a wiring loom and adding the temp sensor. The ECU expects to see certain things if it didn't see them it would get confused.
Click to expand...
I agree, but Johnny seems intent on digging himself into more trouble.
Waste of time trying to fit the wrong EDC or change the loom. Whose paranoid?
 
You must log in or register to reply here.

Similar threads

P
  • Poll
P38A P1621 on a 1998 Gems 4.6 using RSW V4
Replies
2
Views
562
Datatek
Datatek
R
No START LR2 dealer adv ECM issue but no replacement parts available. Is there another way to "jump" the starter?
Replies
4
Views
529
kermit_rr
kermit_rr
R
WARNING 2010 LR2 misdiagnosis
Replies
11
Views
610
Wildefalcon
W
J
L322 3.0d TD6 2002 ECM ISSUE
Replies
12
Views
2K
S50OOL
S
W
Air Con Not Working.
Replies
5
Views
710
Datatek
Datatek
Back
Top