eas valve block rebuid..?

zen

Well-Known Member

Events Planner

Posts

2,602

Location

london

• Nov 20, 2011

• #1

got the o rings,waiting for diaphrams..easy job?looks straight forward..

any tips? (clean enviroment etc?)

thanks

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

Posts

16,482

Location

North Dorset - Near the East & West Stours

• Nov 20, 2011

• #2

Dopey Posted this in a previous thread....check it out it looks to be a good description

Re: P38 EAS Help

--------------------------------------------------------------------------------

I did mine in about 30 mins I think, but its an easy job, just be careful and genital and clean with everything,

Walk through

RR P38 EAS valve - LR4x4 - The Land Rover Forum

--------------------------------------------------------------------------------

He got ribbed pretty good for his use of 'Genital' instead of 'Gentle' Mind....

 

enery8

Active Member

Posts

540

Location

Near Weymouth, Dorset

• Nov 20, 2011

• #3

I downloaded this very instructive post and printed it into a booklet To help me with the rebuild. Here is the link This is an excellent post with many pictures and easy to follow instructions.
good luck with it.

 

zen

Well-Known Member

Events Planner

Posts

2,602

Location

london

• Nov 20, 2011

• #4

thanks!

 

Datatek

Well-Known Member

Posts

46,466

Location

Near Poitiers SW France

• Nov 20, 2011

• #5

Just make sure the block is really clean in all the airways. Oh and fit a new air dryer while you are at it.

 

zen

Well-Known Member

Events Planner

Posts

2,602

Location

london

• Nov 20, 2011

• #6

re drier..ordered..no point in feckin it all up for not spending the extra £40...