eas unlock help please

ok so this is my problem ive got the eas unlock softwear and leads and done it before on a borrowed laptop but now ive got a sony vaio with windows 7
and cant find any soft ware drivers to install to get it talking to my p38 any help is appreciated

HU5SH said:

ok so this is my problem ive got the eas unlock softwear and leads and done it before on a borrowed laptop but now ive got a sony vaio with windows 7
and cant find any soft ware drivers to install to get it talking to my p38 any help is appreciated

Click to expand...

Might try a look here for info.

http://www.landyzone.co.uk/lz/f10/eas-windows-7-a-126937.html

tried that but no joy all iget is com port closed any idears

HU5SH said:

tried that but no joy all iget is com port closed any idears

Click to expand...

Are you useing a USB to serial converter? If so you will need a new driver, or you will have to buy a new convertor with a Vista Driver. Try Maplin

thanks for input my laptop says that its running best drivers available (when ive searched for up dates)
also says that comms is closed is this due to the converter?
also why will it run on xp and windows 7?
any idea's?

Make sure you haven't got anything else trying to use the same port.

all done thanks for all the advice
did every thing the same as before but for some reason it worked this time
noticed on the ride height section that the rhs is a couple of units down on all heights
whats the best way to adjust it from in side on the lap top and trust the screen or outside with a tape measure and from what point to what point what sort of values should i be going for ?

Read through this thread...
http://www.landyzone.co.uk/lz/f10/eas-unlock-calibration-weirdness-133969-5.html

Post 42 from Wammers lists height ranges!

is there anyone in the Bristol area that can help a man out...?EASlocked!an my baby on her belly an can't get up!!!!!DOGSBODY(a member),been round to help two times but unfortunately the laptop was saying port closed!!!..many thanks........bs5

cheers for that any idea why such a wide variance's at each corner?

Weight distribution, and some tolerence for personal preference I'd guess.

HU5SH said:

cheers for that any idea why such a wide variance's at each corner?

Click to expand...

Because the sensors don't fit in exactly the same place and so the readings vary from corner to corner.

ok makes sense

p38rabbit said:

is there anyone in the Bristol area that can help a man out...?EASlocked!an my baby on her belly an can't get up!!!!!DOGSBODY(a member),been round to help two times but unfortunately the laptop was saying port closed!!!..many thanks........bs5

Click to expand...

I'm in Bristol (well 10 miles south of) I've got EAS Unlock on a laptop and an EAS Kicker if either are of any use to you?

PM me if you still need a hand.

You could try downloading windows .net framework software to unlock zip files. I had same problem with this emachine laptop. Could not get EAS software or workshop manual for Jaguar to open till I downloaded a bunch of software directly from microsoft update service to open wmv and zip files. Try that. It should make a difference. You will need a serial connector to convert from USB ports to fit the DB9F legacy cable on ther end of the interface cable. Good luck.