wookieboy
New Member
- Posts
- 9
- Location
- West Sussex
Hi,
Can anyone please help!!! i have a x reg p38 2.5 DSE, my EAS hates me.
First my front left air bag went pop so i changed all for and every thing was good for a week then EAS bleep bleep bump stops.
Took the lap top out cleared everything all fine.
Then it happened again, so i changed valve block, compressor, relay in fuse box both fuses, timer relay and the ECU, taken white connectors apart and cleaned, and the two earth points still the same nothing had changed so out with the laptop read faults and the list was end less and wont clear.
This is the bit im most lost with, door closed nothing door open compressor runs nothing happens and when i turn it off lots of dumped air.
Many thanks in advance for any help.
Jez
Can anyone please help!!! i have a x reg p38 2.5 DSE, my EAS hates me.
First my front left air bag went pop so i changed all for and every thing was good for a week then EAS bleep bleep bump stops.
Took the lap top out cleared everything all fine.
Then it happened again, so i changed valve block, compressor, relay in fuse box both fuses, timer relay and the ECU, taken white connectors apart and cleaned, and the two earth points still the same nothing had changed so out with the laptop read faults and the list was end less and wont clear.
This is the bit im most lost with, door closed nothing door open compressor runs nothing happens and when i turn it off lots of dumped air.
Many thanks in advance for any help.
Jez