eas problem help

grumpy52 · Mar 22, 2015

had a flat battery due to my son leaving the interior light on jump started her now ok the eas was playing up aswell so put the lap top on cant get a good idle continuous and the rx signal has all different values coming back not a continous rf any body any ideas could it b the cable or a ecu fault. the suspension is almost correct but not quite right one for datatek i think

wammers · Mar 22, 2015

Over to Datatek then.

dogsbody · Mar 22, 2015

Could tell you but I'd hate to step on Datatek's toes.

Didn't he say that he was going on a canal cruise?

Ah well

Datatek · Mar 22, 2015

Have you ever had the EAS software working?

grumpy52 · Mar 22, 2015

yes keith when l fitted the new valve block but the original cable l lost it. so this cable is one l borrowed and lm not convinced its ok and the guy l borrowed it off has never used it but the idle light will not stop green and u get a list of faults like war and piece also this lap top workrd ok when it went into hard fault last time before i fitted the valve block, also u cant adjust the heights as she is sitting slightly to one side when in normal height. the only thing l havent checked is the rear of the obd socket as it was dark when l got round to testing it again

Datatek · Mar 23, 2015

grumpy52 said:
yes keith when l fitted the new valve block but the original cable l lost it. so this cable is one l borrowed and lm not convinced its ok and the guy l borrowed it off has never used it but the idle light will not stop green and u get a list of faults like war and piece also this lap top workrd ok when it went into hard fault last time before i fitted the valve block, also u cant adjust the heights as she is sitting slightly to one side when in normal height. the only thing l havent checked is the rear of the obd socket as it was dark when l got round to testing it again

If you know the laptop/USB adaptor combo works, then quite likely it's the cable. Certainly worth checking the back of the OBD connector though.

grumpy52 · Mar 23, 2015

cheers keith its p@@@@@g down here so will have a look when it fairs up and get back to u

grumpy52 · Mar 23, 2015

well guys went out this morning with the trusty lap top did a bit of trial and error more error l think it was in the wrong port tried all the usb ports and done it . set it up and we are all ok so thanks for all ur help boyz

Datatek · Mar 23, 2015

grumpy52 said:
well guys went out this morning with the trusty lap top did a bit of trial and error more error l think it was in the wrong port tried all the usb ports and done it . set it up and we are all ok so thanks for all ur help boyz

Good news

But no cable order

grumpy52 · Mar 24, 2015

sorry keith but l thought id just give it one last try ironic thing is its ur cable l eventualy got it working with these programes are so temprimental its unreal but ive got it right it bugged me because it didnt sit right so now she sits straight and looks right but thanks for all ur help

Datatek · Mar 24, 2015

grumpy52 said:
sorry keith but l thought id just give it one last try ironic thing is its ur cable l eventualy got it working with these programes are so temprimental its unreal but ive got it right it bugged me because it didnt sit right so now she sits straight and looks right but thanks for all ur help

Only joking about the cable, it's a not for profit job anyway, just pleased you got it sorted

eas problem help

grumpy52

Active Member

wammers

No longer with us, RIP

dogsbody

Very senior member

Datatek

Well-Known Member

grumpy52

Active Member

Datatek

Well-Known Member

grumpy52

Active Member

grumpy52

Active Member

Datatek

Well-Known Member

grumpy52

Active Member

Datatek

Well-Known Member

Similar threads