Drat

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

rangerovertoy

Member
Posts
90
Hi guys,
finally decided to take the BECM out today in an effort to cure some of the spurious messages i get, safe and secure in the knowledge i had saved the link some kind soul posted,with a very well written explanation of the BECM boards etc,got it out no visible dry joints etc, thought i would just put computer on and check how to strip it only to find i hadnt got the link!!

so question is does anyone else have it saved? I think it was posted by desertdude,but i have been back 40 pages and tried searching for it but to no avail,it was a damn good link the page was very well explained along with good drawings or photos of the dreaded Becm
hoping someone else kept it properly!!
not really surprised i cant find it as ive only just found a pm from Datatek that he sent before christmas! doh!!:confused:
 
I love that thread on RR.net. It's somewhat accurate. I have quite a few on there with regards to some of their threads. If fact, i supplied all the equipement to the site admin to start a becm workshop in the States, but it didn't work out.

Just be careful stripping down your becm, & prepare yourself that it might not work again afterwards. However, I have a huge huge stock of repacement parts if needed.
 
Pete The Biker said:
Was this the Dersertdude thread you were thinking of?

http://www.landyzone.co.uk/lz/f10/hello-land-sand-need-help-dead-rangy-becm-207177-2.html

This one from RANGEROVERS.NET HOME gives shed-loads of info:-
Demystifying the BeCM

Good luck!

Pete

PS. it's always a good idea to put your location in your Profile ('About Me' section)
Click to expand...


Pete your a star!! it was a link on the 2nd one you posted! the pics were good on desertdudes post which is maybe why i remembered it, as to location, Ahem Im in spain! not to many people here with nanocom or fault mate,so have to be very careful what i take apart and cross fingers, offer sacrifices to the gods,and pray everytime i do it!!
cheers bud!
 
Rick-the-Pick said:
I love that thread on RR.net. It's somewhat accurate. I have quite a few on there with regards to some of their threads. If fact, i supplied all the equipement to the site admin to start a becm workshop in the States, but it didn't work out.

Just be careful stripping down your becm, & prepare yourself that it might not work again afterwards. However, I have a huge huge stock of repacement parts if needed.
Click to expand...


Thanks Rick,Im hoping never to have to use your services as postage here is ,A expensive
B non existant for parcels
C big parcels get left at the local townhall then no one notifies you of its arrival and they kind of vanish into thin air!!
See my post to pete,I walk on eggshells around the damn car just in case!!
 
chickened out of taking Becm apart just cleaned all cntacts with cleaner and a quick visual inspection of the top board,had ten mins this morning to put it back in,didnt reasemmble seat or its connections,the engine fired ointo life(hurrah) central locking works, BUT!!
no electric windows or sunroof functioning! damn
anyone know which connector this is likely to be? wont get back onto it till late this afternoon, so hopefully its something simple like a poorly plugged ion connector? or am i dreaming?:eek:
 
rangerovertoy said:
chickened out of taking Becm apart just cleaned all cntacts with cleaner and a quick visual inspection of the top board,had ten mins this morning to put it back in,didnt reasemmble seat or its connections,the engine fired ointo life(hurrah) central locking works, BUT!!
no electric windows or sunroof functioning! damn
anyone know which connector this is likely to be? wont get back onto it till late this afternoon, so hopefully its something simple like a poorly plugged ion connector? or am i dreaming?:eek:
Click to expand...
That could be the central switch pack - they have been known to give up the ghost and not be a fault of the BeCM....
 
rangerovertoy said:
chickened out of taking Becm apart just cleaned all cntacts with cleaner and a quick visual inspection of the top board,had ten mins this morning to put it back in,didnt reasemmble seat or its connections,the engine fired ointo life(hurrah) central locking works, BUT!!
no electric windows or sunroof functioning! damn
anyone know which connector this is likely to be? wont get back onto it till late this afternoon, so hopefully its something simple like a poorly plugged ion connector? or am i dreaming?:eek:
Click to expand...

Download RAVE from the link in the "How To" section, that will give you all the connector ID's and everything else you might want:)
 
Datatek said:
Download RAVE from the link in the "How To" section, that will give you all the connector ID's and everything else you might want:)
Click to expand...
yep have downloaded it but for some reason this old computer cannot open it(xp)trying to get some time to download it onto my windows 7 newer one in the hope that will be able to open it!,didnt get a chance to get back on it today, and doubt i will tomorrow either,internet conncection here is shall we say variable?(wireless and extremely slow(54mb)often drops out with no warning and can be off for days at a time,
ah the joys of living a hasle free life in the mountains of spain eh?
 
rangerovertoy said:
yep have downloaded it but for some reason this old computer cannot open it(xp)trying to get some time to download it onto my windows 7 newer one in the hope that will be able to open it!,didnt get a chance to get back on it today, and doubt i will tomorrow either,internet conncection here is shall we say variable?(wireless and extremely slow(54mb)often drops out with no warning and can be off for days at a time,
ah the joys of living a hasle free life in the mountains of spain eh?
Click to expand...
You are better off with XP than 7, depending on the download it may be an ISO file that needs converting to run, try alcohol120%, Google it.
If all else fails, I can send it to you on a CD.:)
 
Datatek said:
You are better off with XP than 7, depending on the download it may be an ISO file that needs converting to run, try alcohol120%, Google it.
If all else fails, I can send it to you on a CD.:)
Click to expand...


now that sounds good to me!! alcohol 120%? will google it,take it i can,t buy any to drink though:)
 
You must log in or register to reply here.

Similar threads

P38 guy
P38A Aftermarket remote
Replies
1
Views
756
pwood999
pwood999
F
key Fob/Central locking
2
Replies
33
Views
2K
Grrrrrr
Grrrrrr
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
2K
TITCH SANDERS
TITCH SANDERS
A
P38A Cruise control question ( wheel speed issue )
Replies
16
Views
2K
AndyF07
A
Crankington
L322 pulling my hair out! (Not much left)
2 3
Replies
57
Views
3K
Pug957
P
Back
Top