DORIS the td5 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
CFB319FD-C77C-49ED-923A-A5CBDD2B4C2C.jpeg


8DF41E57-5DD7-4530-97F6-17B984FC8299.jpeg


86CBF036-7876-44C1-B514-272E95EECF79.jpeg


735A7945-BBDB-42A8-AE9E-F2259D2B0687.jpeg


2FD8FEEF-E261-495A-A1E3-DFAA19011FF3.jpeg
 
CFD74834-ACCD-4D19-A3DD-ED2E18D6D23A.jpeg


7CFD4F33-6DB9-4FD4-AC67-F79E7E99A35E.jpeg


View from 20mm first hole

Not being a lover of stress full situations I wanted to pre make an inspection hole in order to be ready if the pump did ever pack up
 
Any one had experience buying this manifold , sounds pretty good and reasonably priced
 
Getting a very good deal on these at the mo so blasting every hole in the chassis with them, n a little marker spray round the hole to mark it as done

A0885B0B-9EC3-44C2-8521-CFEDB20B0DF8.jpeg


57FE93C9-63DC-4921-ACA5-51A0713E6F6C.jpeg
 
626F525A-85B3-4630-8209-5C18A6D61261.jpeg


71D72FF7-31EE-4006-B4C2-B5469492FAE1.jpeg


Removed the two rear wing support brackets as the bolts had come loose and become rusty/seized, so will clean them up paint and re rift with new nuts and bolts
 
Busy painting the house most nights hopefully get chance to fit it at weekend
 
Back
Top