Discovery td5,bleeding brakes

Hi am I going to be able to bleed the brakes after replacing the master cylinder without the aid of a computer, or will I need to take it to a garage please.

bleed as normal ,no computer is needed,the order doesnt really matter just do a bit at each nipple before fully doing any ,simple system to bleed, ive had to adjust the servo rod several times after fitting a new master cylinder, you will know by brakes pulling themselves on after several miles or pedal having too much travel, pulling on requires the adjuster screwing in ie clockwise ,too much travel screwing out

Okay that's good to know, how do I get access to the servo adjustment. I'm assuming it must somewhere near the top of the pedal where it pivets. Thanks for your help,that should keep me busy tomorrow.