Discovery Roof light bar

battenberg · Dec 21, 2007

This fred is not really how do I do that... do I need relay's and fuses ect..?

I'm getting a light bar and was just wondering how others had wired them in..??

I read some posts about spliting the light pairs, wiring them to the headlights etc...

More how did you configure yours??

I was thinking about a two way switch. To have both a manual control or via full beam stalk control, all via relays etc...

Pikey · Dec 21, 2007

if you don't have a seperate switch they can fail the MOT. the feed should go from the battery to the relay and the switched live should come from The main beam, via a piggyback connector. Don't use scotchbloks. Most peeps run the wires down the side of the snorkel if they have one. There is a wiring diagram on one of the threads on here.

battenberg · Dec 21, 2007

Interesting point about the MOT, thanks pikey - never considered that!!

stig · Dec 21, 2007

you will have to wire them up through a switch so that they can only be turned on when off the public highway (that includes BOAT's) as they will not conform to the construction and uses act (too high)

Discovery Roof light bar

battenberg

Well-Known Member

Pikey

Dummy Ejection Facilitator..

battenberg

Well-Known Member

stig

New Member

Similar threads