Discovery boot floor help!

Adamsiarey · Feb 2, 2015

Hi all, I know there's loads of other boot floor threads but I couldn't find some info, I'm looking to replace the 2 floor side panels, but I don't know how to fix them in place? Because isn't most of it just sealed using that ****y body seal stuff? Basically has any one welded the side panels in? Or how did you do it? Any help or advice/pictures will be Much appreciated

thanks

Dippypud · Feb 2, 2015

Adamsiarey said:
Hi all, I know there's loads of other boot floor threads but I couldn't find some info, I'm looking to replace the 2 floor side panels, but I don't know how to fix them in place? Because isn't most of it just sealed using that ****y body seal stuff? Basically has any one welded the side panels in? Or how did you do it? Any help or advice/pictures will be Much appreciated thanks

Weld

ruffday · Feb 2, 2015

Adamsiarey said:
Hi all, I know there's loads of other boot floor threads but I couldn't find some info, I'm looking to replace the 2 floor side panels, but I don't know how to fix them in place? Because isn't most of it just sealed using that ****y body seal stuff? Basically has any one welded the side panels in? Or how did you do it? Any help or advice/pictures will be Much appreciated thanks

They are welded and then sealed up.

Adamsiarey · Feb 3, 2015

So I take it the breath thing to do would be grind the sealant off then just weld back on? Is it worth resealing after? Cheers

Dippypud · Feb 3, 2015

Adamsiarey said:
So I take it the breath thing to do would be grind the sealant off then just weld back on? Is it worth resealing after? Cheers

Will you be selling tickets ?

for the welding of the sealant ...

Adamsiarey · Feb 3, 2015

Haha sorry I ment after grinding the sealant off weld the panel in then seal it back over again or will it be fine to just rust proof it and paint it? Thanks

Dippypud · Feb 3, 2015

Adamsiarey said:
Haha sorry I ment after grinding the sealant off weld the panel in then seal it back over again or will it be fine to just rust proof it and paint it? Thanks

Sealant normally peels / scrapes off, grinding it just chokes the disk

seal after welding, to keep the water out from underneath ...

sealant should stay flexible after application, so use https://www.google.co.uk/webhp?tab=ww&ei=7RLRVIqjBsup7Aan-oEg&ved=0CAoQ1S4#q=sikaflex&tbm=shop

or

https://www.google.co.uk/webhp?tab=ww&ei=7RLRVIqjBsup7Aan-oEg&ved=0CAoQ1S4#tbm=shop&q=Tigerseal

type stuff ...

ronsealdeath · Feb 3, 2015

The side panel braces the inner quarter panel which secures the rear seatbelt real so you gotta weld them. Has to be a seam weld according to mot book. Check out yrm website for pics. Sikaflex will cover **** welds

I would then use hammerite over top as it etches rusty metal slightly.
Take care not to get hot spatter on plastic fuel tank and blank off front of car to stop grinding dust wrecking your electrics. Good luck

Adamsiarey · Feb 3, 2015

Thanks for all your advice

and the tank is out so no worrys about that lol

ruffday · Feb 4, 2015

Yep needs to be sealed really.
Also might be worth resealing the rear quarter windows and alpine lights as that is most likely the cause of the rust in the first place.

Discovery boot floor help!

Adamsiarey

Member

Dippypud

Never Knowingly Understood

ruffday

Active Member

Adamsiarey

Member

Dippypud

Never Knowingly Understood

Adamsiarey

Member

Dippypud

Never Knowingly Understood

ronsealdeath

Sagging Member

Adamsiarey

Member

ruffday

Active Member

Similar threads