Discovery 4 gear selector stuck

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Phillipssam

New Member
Posts
8
Location
Uk
Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks
 
Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks
Please re-post in the Discovery Section.

@blue beasty
 
I tried loads of other sections and this was the only one that would let me post...all the others said I didn't have the right permissions?!
 
Welcome to the forum
I7pha4t.jpg


Ask in the discovery section. If they dunt know then the same powered lift n turn gear selector is used on rr's so ask in the range rover section.

Main forum index:
www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10
 
Hello
I have an issue with my disco 4. I can get the engine to start but the gear selector will not turn from P. It rises up but will not turn. Brake pedal pushed and all brakes lights working. I have tried a hard reset (disconnecting negative battery lead for 20mins) and still the gear selector is locked in P. Can anyone shed any light on what the issue might be?! Many Thanks

If you put your location there might be someone near with a code reader.
If no go join the D3/4 forum and ask on there.
 
If its the same one as on Evoque, I know they had quality issues initially (shock horror!) with the mouldings on the bits that could catch - but I believe that stopped it poppin up, not turning.
 
Back
Top