Discovery 2 drivers window fault?!

Hi all, in need of abit of help here ... Drivers front window was working all fine.. had no issues what so ever . Just tried closing it.. got half way up and stopped ....... I'm hearing clicking on the relay, fuse is good... Dead motor? How can I get this bloody window up?

Muddy viking said:

Hi all, in need of abit of help here ... Drivers front window was working all fine.. had no issues what so ever . Just tried closing it.. got half way up and stopped ....... I'm hearing clicking on the relay, fuse is good... Dead motor? How can I get this bloody window up?

Click to expand...

No easier way, take the door card off, you may have to undo the bolts that secure the window to its lifting frame, then shove it up out of the way and keep it there with bits of wood, inside the door or clamps and summat soft to grip it over the top of the door frame. etc.
Then you can remove the mechanism at your leisure and fix it.

Once the door card is removed, don’t dive straight in but investigate why the glass isn’t rising, could be a worn/slipping regulator this will give u a clicking sound, there are no individual relays involved.
As the door card has been removed its just t a 30 min job to replace a regulator.

discool said:

Once the door card is removed, don’t dive straight in but investigate why the glass isn’t rising, could be a worn/slipping regulator this will give u a clicking sound, there are no individual relays involved.
As the door card has been removed its just t a 30 min job to replace a regulator.

Click to expand...

Having done this job, I can tell the OP that he will need to move the glass upwards to be able to access the regulator and the motor. The glass and it's attached bits get in the way of the bolts otherwise.
There are threads on here and I put some photos on one to help others with the same problem.
Didn't know you had a D2?