Discovery 2 Alarm

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jamiegreen

Jamiegreen

Well-Known Member
Posts
628
Location
Wales
Hey, just picked up my new disco today and noticed the key fob isn't genuine and when I press unlock/lock, it does exactly what it's meant to but the indicator's don't flash, and when I get into the vehicle it beeps for about 5-10 secs, sounds like the headlight left on chime I think. And as far as I can tell I couldn't get the volumetric sensors to activate the alarm.
Is this just a case of super locking thing being disabled, saw something about it on the Hawkeye I think.

But my Hawkeye is stuck with my old truck on a transporter lorry.. which is being held by police ... My luck :rolleyes: hopefully gets moving soon.

Also when in 5th gear there's like a slight whine from somewhere maybe under dash but all drives fine, not sure what that is but I do know every fluid is in desperate need of changing :p
 

Attachments

  • Capture+_2018-02-05-20-12-05.png
    Capture+_2018-02-05-20-12-05.png
    156.7 KB · Views: 147
Jamiegreen said:
it does exactly what it's meant to but the indicator's don't flash, and when I get into the vehicle it beeps for about 5-10 secs, sounds like the headlight left on chime I think
Click to expand...
For the hazards there is a setting to be completely disabled on alarm related actions o most likely it' that, as about those chimes explain better, what do youn mean when you get into the vehocle, simply as that you hop in and it chimes(which is quite unlikely) or you turn ignition on?
 
sierrafery said:
For the hazards there is a setting to be completely disabled on alarm related actions o most likely it' that, as about those chimes explain better, what do youn mean when you get into the vehocle, simply as that you hop in and it chimes(which is quite unlikely) or you turn ignition on?
Click to expand...
..let me go check I forgot :p
 
sierrafery said:
For the hazards there is a setting to be completely disabled on alarm related actions o most likely it' that, as about those chimes explain better, what do youn mean when you get into the vehocle, simply as that you hop in and it chimes(which is quite unlikely) or you turn ignition on?
Click to expand...
5 chimes upon the second ignition.
 
sierrafery said:
Then it's normal, SLABS self test completion.. read at least the vehicle owner's handbook :cool:
Click to expand...
I've known of the 3 beeps being a self test, but 5, that's a little excessive, my previous 2 facelifts didn't do it :confused:
Thanks for the info though, will get the Hawkeye plugged in when if finally arrives.
 
Seatbelt audible warning:
- Timed - The audible warning is on for 6 seconds after the ignition is turned on
- Buckle - The audible warning is on for 6 seconds after the ignition is turned
on or until the buckle is fastened.
- Ignition II - If the buckle is unfastened when the ignition is turned on then the
audible warning is on for 6 seconds.
- Disable - The audible warning is not used.
 
You must log in or register to reply here.

Similar threads

F
Discovery 2 headlight woe
Replies
1
Views
243
sierrafery
sierrafery
J
Help.. stuck in superlock alarm
Replies
4
Views
1K
discool
discool
E
Disabling Alarm and Immobilizer
Replies
12
Views
2K
Ed Watson
E
K
immobilised disco 2, no EKA
Replies
1
Views
878
Landmark2
Landmark2
PastyMuncher83
L322 2006 TD6 - RESETTING GEARBOX ADAPTIVE VALUES
Replies
1
Views
711
backinblack
backinblack
Back
Top