Discovery 1 reat seatbelt mounts needed

Trig · Jun 14, 2010

Can anyone point me in the direction of where to find a pair if rear seatbelt mounts for a Disco 1. Mine are pretty goosed so I do need to replace them, I found this image on here from someone else needing them in the past.

http://www.landyzone.co.uk/lz/attachments/f8/15966d1274287273-disco-1-seatbelt-mounts-dsc00330.jpg

If anyone has any or can point me where to get them then I would appreciate it.

Vagrent · Jun 14, 2010

Will look at me disco see if mine are ok, I only got it for its engine,
but i suspect they will be in similar condition. Going to do some more on me 90 in a bit, so will have a look for ya
or are you after new ones?

Andy200TDi · Jun 14, 2010

I got mine from paddocks... they are expensive though!

See if you can salvage the angled bracket and just buy the pins and bolts.

Trig · Jun 14, 2010

I dont need new, just a pair that dont have half a seized bolt in the top (the bolt holding the seatbelt down was seized and the head had to be ground off)

ginge1100 · Aug 20, 2010

hi lads ,i was after the same parts and was wondering does the eye bolt part have a shoulder on as mine are to far gone to tell.ta Ginge.

GRATCH · Aug 20, 2010

ginge1100 · Aug 20, 2010

short and sweet ,thanks fella.ginge

bigrichsri · Aug 21, 2010

I also need new ones of these, had to hack them off to replace boot floor. How much is expensive for new?

GRATCH · Aug 21, 2010

Ooooooh I can feel an auction coming on

I may have two servicable sets available, I'll try to remember to dig them out tomorrow.

ginge1100 · Aug 21, 2010

i would be interested in a set if you find them.Ginge

GRATCH · Aug 21, 2010

Here we go piccies. The right hand set in the first piccie and the second piccie are the best pair which ginge has first dibs on. the other set are not in as good condition but still useable.

(clickable images)

bugbog101 · Aug 22, 2010

Easy solution...
Just make some new ones. I used 3mm plate, just takes a bit of effort to bend the plate in a vice. Passed MOT no probs.

GRATCH · Aug 22, 2010

bugbog101 said:
Easy solution...
Just make some new ones. I used 3mm plate, just takes a bit of effort to bend the plate in a vice. Passed MOT no probs.

Youse a clever man to make eye bolts outta 3mm plate

:doh:

Dr No · Sep 3, 2012

GRATCH said:
Here we go piccies. The right hand set in the first piccie and the second piccie are the best pair which ginge has first dibs on. the other set are not in as good condition but still useable.

View attachment 17827 View attachment 17828 View attachment 17829

(clickable images)

Gratch,

Did you sell them all or do you have some kicking around still. Gotta make my two seater sports more practical again

(

Big Jig

bayleysdisco · Sep 3, 2012

made my brackets from 3mm box section

Dr No · Sep 5, 2012

3mm Box section it is then, anyone live close to me? I need a template. I will do the work just need to borrow them for a few mins to get an idea of what I need. (If only I had kept the ones I chopped up. Bugger)

Pete
Builth Wells

chunkymunky · Sep 5, 2012

Buy new. Rear seats hold the kids in ? Want on your conscience if they fail? There's times to botch and times it ain't worth it

Dr No · Sep 5, 2012

chunkymunky said:
Buy new. Rear seats hold the kids in ? Want on your conscience if they fail? There's times to botch and times it ain't worth it

That's all right I ain't got kids.

Discovery 1 reat seatbelt mounts needed

Trig

New Member

Vagrent

Yaaaar

Andy200TDi

New Member

Trig

New Member

ginge1100

Member

GRATCH

HUGE MEMBER

ginge1100

Member

bigrichsri

Active Member

GRATCH

HUGE MEMBER

ginge1100

Member

GRATCH

HUGE MEMBER

bugbog101

Member

GRATCH

HUGE MEMBER

Dr No

Active Member

bayleysdisco

Member

Dr No

Active Member

chunkymunky

New Member

Dr No

Active Member

Similar threads