Discovery 1 reat seatbelt mounts needed

Can anyone point me in the direction of where to find a pair if rear seatbelt mounts for a Disco 1. Mine are pretty goosed so I do need to replace them, I found this image on here from someone else needing them in the past.

http://www.landyzone.co.uk/lz/attachments/f8/15966d1274287273-disco-1-seatbelt-mounts-dsc00330.jpg

If anyone has any or can point me where to get them then I would appreciate it.

Will look at me disco see if mine are ok, I only got it for its engine,
but i suspect they will be in similar condition. Going to do some more on me 90 in a bit, so will have a look for ya
or are you after new ones?

I got mine from paddocks... they are expensive though!

See if you can salvage the angled bracket and just buy the pins and bolts.

I dont need new, just a pair that dont have half a seized bolt in the top (the bolt holding the seatbelt down was seized and the head had to be ground off)

hi lads ,i was after the same parts and was wondering does the eye bolt part have a shoulder on as mine are to far gone to tell.ta Ginge.

No

short and sweet ,thanks fella.ginge

I also need new ones of these, had to hack them off to replace boot floor. How much is expensive for new?

Ooooooh I can feel an auction coming on
I may have two servicable sets available, I'll try to remember to dig them out tomorrow.

i would be interested in a set if you find them.Ginge

Here we go piccies. The right hand set in the first piccie and the second piccie are the best pair which ginge has first dibs on. the other set are not in as good condition but still useable.



(clickable images)

Easy solution...
Just make some new ones. I used 3mm plate, just takes a bit of effort to bend the plate in a vice. Passed MOT no probs.

bugbog101 said:

Easy solution...
Just make some new ones. I used 3mm plate, just takes a bit of effort to bend the plate in a vice. Passed MOT no probs.

Click to expand...

Youse a clever man to make eye bolts outta 3mm plate:doh:

GRATCH said:

Here we go piccies. The right hand set in the first piccie and the second piccie are the best pair which ginge has first dibs on. the other set are not in as good condition but still useable.

View attachment 17827View attachment 17828View attachment 17829

(clickable images)

Click to expand...

Gratch,

Did you sell them all or do you have some kicking around still. Gotta make my two seater sports more practical again (


Big Jig

made my brackets from 3mm box section

3mm Box section it is then, anyone live close to me? I need a template. I will do the work just need to borrow them for a few mins to get an idea of what I need. (If only I had kept the ones I chopped up. Bugger)

Pete
Builth Wells

Buy new. Rear seats hold the kids in ? Want on your conscience if they fail? There's times to botch and times it ain't worth it

chunkymunky said:

Buy new. Rear seats hold the kids in ? Want on your conscience if they fail? There's times to botch and times it ain't worth it

Click to expand...

That's all right I ain't got kids.