discodaddy7
Member
- Posts
- 12
- Location
- Lancashire
Hi guys, can anyone advise me if the heater motor from a 300 discovery will fit into a 200 discovery?
Thanks in advance
Thanks in advance
Discovery 1 heater motor
- Thread starter discodaddy7
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
300bhp/ton
Well-Known Member
- Posts
- 4,744
- Location
- Near MK
no don't think they will.
discool
Well-Known Member
- Posts
- 13,499
Definitely Not... is completely different.
discodaddy7
Member
- Posts
- 12
- Location
- Lancashire
Thanks, I had to ask as a friend is breaking his 300 . Next question is does anyone know where I can buy a new one, so far I've only found them on MM 4x4.
It's time I replaced it I think five years without one is long enough lol
It's time I replaced it I think five years without one is long enough lol
I take it you have a 200. Real pain in the backside to get the heater box out.
All the dash needs to come out. Would be best to replace the complete unit.
Cant remember if the motor comes out without splitting the cases.
Matrix is a real pain to swap.
All the dash needs to come out. Would be best to replace the complete unit.
Cant remember if the motor comes out without splitting the cases.
Matrix is a real pain to swap.
discool
Well-Known Member
- Posts
- 13,499
For a 200 series disco I've only see pictures of the heater, but I can confirm the motor is very similar to the one fitted to the RRC as I have the parts catalogues and Haynes manuals for both vehicles, so that's something worth alook for a replacement.
https://www.lrdirect.com/RTC6693-He...5dYTojMPLZhRRrfnhcaUwIeKpCq1wLsP-rBoCEIjw_wcB
https://www.lrdirect.com/RTC6693-He...5dYTojMPLZhRRrfnhcaUwIeKpCq1wLsP-rBoCEIjw_wcB
Last edited:
elliot0850
Active Member
- Posts
- 184
- Location
- leicester
When I replaced mine i went Down the scrat yard and matched it up with one the same size. Think I needed to swop the fan over. 2 years later it's still ok
Similar threads
