Discovery 1 1995 abs modulator bleeding problems
- Thread starter steveo999
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,140
- Location
- Arad/Romania
did you try with the modulator unplugged too?...maybe it gets some false feed from somewhere and it closes the valves or something
Sorted it now the fault was with the brand new PRV (****part) it's was not letting any fluid from the top of PRV to the block must have been manufactured wrong, fitted my old one and now have fluid back although not right pressure as that PRV was faulty in the 1st place, but at least now I know where the fault is
Thank god
Thank god
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
Steveo,
Same problem with me, but in my case was just one wheel.
Check out my video on youtube.
I disassembled my modulator and found that one of the solenoids was stuck.
https://www.youtube.com/watch?v=0-wxqbhEYD4
Bruno.
Disco 1 V8 - Brazil.
Now I see that you found the problem, my mistake.
Same problem with me, but in my case was just one wheel.
Check out my video on youtube.
I disassembled my modulator and found that one of the solenoids was stuck.
https://www.youtube.com/watch?v=0-wxqbhEYD4
Bruno.
Disco 1 V8 - Brazil.
Now I see that you found the problem, my mistake.
Last edited:
