Disco Refurb

Mikey1970 · Apr 1, 2009

Hi Guys, Just thought I'd show you some pics I took after making the mistake of lifting up the carpet in tha back of my 96 disco. This job is almost done but there are many more before I'll be happy.

Mike

*minty* · Apr 1, 2009

Ive noticed the metal has chopped off the little finger does it hurt

Andy200TDi · Apr 1, 2009

Not the worst floor I've seen on here... good job though. having the floor out does have it's advantages... new shocks, clean sedimentor and a bit of chasis welding when I did mine last year.

Mikey1970 · Apr 2, 2009

Andy200TDi said:
Not the worst floor I've seen on here... good job though. having the floor out does have it's advantages... new shocks, clean sedimentor and a bit of chasis welding when I did mine last year.

Had a good look round while the floor was out, i've freed off all the bolts for everything I need/want to refurb, the 2 seat belt anchor points on the wheel arches need attention o/s is far worse than the near side but the sills and the chassis itself including the rear cross member are mint apart from some surface rust which will be rubbed down and painted. I'm in the process of getting the 20t press at work fixed at the moment so I can do all my bushes if they need it or not. to be honest, when I found this disco after looking at about 20 before I knew it must be the one to get as it has a full main stealer service history upto 80k and it's only on 91k now.

Mike

James · Apr 2, 2009

I have managed my bushes without a press, you jan cut a slot across them then knock them out.

Disco Refurb

Mikey1970

New Member

Attachments

minty

Well-Known Member

Andy200TDi

New Member

Mikey1970

New Member

James

Active Member

Similar threads

Disco Refurb

Mikey1970

New Member

Attachments

*minty*

Well-Known Member

Andy200TDi

New Member

Mikey1970

New Member

James

Active Member

Similar threads

minty