Disco Rear Discs quick question

Hi fellow lanners,

Ok here goes...

I got LR Disco1 2.0L MPI, and it failed n MOT test about 4 monhs ago. This really ticked me off and I took it out on the Land Rover by putting it in a box (Girlfriends garage) and leaveing it there... I now realise what a waste and i should love the car that give me so many exciting experiences.

Now im not a mechanic, and need to replace the REAR DISCS as they are badly pitted... so here goes;

****Would rear discs from a deisel Disco from the same year fit on my petrol (MPI) Disco? I am buyin new and want to try to aviod going through expensive car dealers or mechanics?***

Thanks in advance...and my aologies if this question is elsewhere on the forum?

regards
Wudokai ([email protected])

get the right brakes for the motor.nothing morer important than stopping a motor.You cant crash it if it dont move.The right discs wont be any dearer.

My usual parts supplier only list 1 brake disc type for disco 1 so i'd say they are the same.

thanks for the quick reply goonarmy...

And yes i see where you are coming from as its only common sense really.... ill have a look online see what i can see

Thanks again
Wudokai

ok confused... pmsl

AV1ADM thanks now thats what i was thinkin... but im confused again, doesnt take much lol..

Ill try phone Land Rover but i know they will tell me to use part number and then try to charge me though the roof

wuddy

The tdi injun is more powerful than the mpui injun.The brakes on a car have to be more powerful than the injun(or else it wont stop). Therefore if the brakes are all Tdi spec then thats fine. But chck first, should be easy enough.Check with paddocks/craddocks online.

I looked on Paddocks they only list disco 1 disks no change in partnumber for the different engines.
- Brakes

Your vehicle was built at a time when Land Rover were trying to rationalise parts.especially axles & brakes, so I would be very surprised if the Mpi has different brakes to the Tdi

there you go you now know for sure yer brakes will be fine!

there was also a very recent thread on changing discs, methods in there may help when you come to do the job.

thanks everyone for the replies..

I will now order the parts and hopefully when all is good my little disco will be MOT passworthy and life will be restored her!

Thanks again peeps!
Mark

wudokai said:

thanks everyone for the replies..

I will now order the parts and hopefully when all is good my little disco will be MOT passworthy and life will be restored her!

Thanks again peeps!
Mark

Click to expand...

do new wheel bearings while you are at it... easy enough to do and wont cost you a fortune.

battenberg said:

do new wheel bearings while you are at it... easy enough to do and wont cost you a fortune.

Click to expand...

and while yer at it do the drive flanges

Land Rovers For Sale - Drive flanges for dependers, discos and RR - Powered by PhotoPost Classifieds

spam spam spam .........