Disco key fob question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

britishwardog

Active Member
Posts
394
Location
Cranleigh, Surrey
I know there's umpteen pages about these but after an exhaustive search and almost losing the will to live i failed to find the answer......how can i tell whether i need a single button fob or a two button fob? (car had none when i bought it), it's a '95 300Tdi......thanks in anticipation.
 
About the only easy check I can think of (as yours is probably just on the brink of being two button...) check in the engine bay for the siren, if it has a black 'aftermarket looking' siren bolted to the inner wing, it'll be a 2 button. The old ones used the horn instead!
 
About the only easy check I can think of (as yours is probably just on the brink of being two button...) check in the engine bay for the siren, if it has a black 'aftermarket looking' siren bolted to the inner wing, it'll be a 2 button. The old ones used the horn instead!
I know it's a bit of a dumbass question :doh: but although mine has a siren bolted on the inner wing it does look exactly like a normal car horn, is this the two button type keyfob siren or did LR actually bolt the car horn on the inner wing as well just to confuse me?
 
open a rear window. lock your doors. wait a min. then open your rear door through the open window and see what your alarm sounds like either hoen or siren.
Siren 2 buttons
Horn 1 button
 
I know it's a bit of a dumbass question :doh: but although mine has a siren bolted on the inner wing it does look exactly like a normal car horn, is this the two button type keyfob siren or did LR actually bolt the car horn on the inner wing as well just to confuse me?

Sure is :) how can a siren look like a car horn.
If... u have a securty system and u can start the engine without a fob then u have a single button system.
A fob is required to re-mobilise the engine with the two button system.
 
Back
Top