Disco 2 Key FOB

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Badger688

Well-Known Member
Full Member
Posts
519
Location
Hampshire
Hi All,
I still have a Working Key FOB! Just!!
But it's starting show its age and usage o_O
The Landrover push button has now disintegrated, so was left with a hole in the centre.
Have temporarily fixed it with a block of wood covering the switch button??:rolleyes: and black nasty (Gaffa Tape!!), it's still working :D

Question, if I get a blank key FOB? Can I transfer the electronic elements from old to new????

Kev
 
Hi All,
I still have a Working Key FOB! Just!!
But it's starting show its age and usage o_O
The Landrover push button has now disintegrated, so was left with a hole in the centre.
Have temporarily fixed it with a block of wood covering the switch button??:rolleyes: and black nasty (Gaffa Tape!!), it's still working :D

Question, if I get a blank key FOB? Can I transfer the electronic elements from old to new????

Kev
Yes and for once I am talking from knowledge as I have done it.
Get a kit off eBay comes with fob, microswitches and a key blank. I got two.
Easypeasy!
 
@Stanleysteamer
Thanks for quick response

Was there any problems with taking battery out whilst swopping?
I.e. it still keeps its digital memory??

Kev
It's a while since I did it but I don't think so and I am also fairly sure the kit came with spare batts too.
Think you should be able to swop them over with the batt still in, but no, thinking about it the driver's manual tells you how to swap batts in the fob so there can't be a problem. :)
 
Back
Top