Disco hocky sticks ??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landowner

landowner

Pensioner Pete
Full Member
Posts
13,788
Location
WA2
Just wondering if Early Defender Front hocky sticks will fit a Disco 1.

I have a pair of Defender ones fitted with new polybushes and wondered if I could just swap em over

Ta
 
maybe. landowner, the arms are the same profile but they come in two different widths. check the girth where it mounts to the axle. narrow arms have a 24mm nut at chassis mount and the thicker arms have a 30mm nut.
 
3.5 efi said:
maybe. landowner, the arms are the same profile but they come in two different widths. check the girth where it mounts to the axle. narrow arms have a 24mm nut at chassis mount and the thicker arms have a 30mm nut.
Click to expand...

Ok ta, I'll measure them over the weekend thanks:):)
 
One is 38mm (10 spline) & the other is 44mm (24 spline) across the bush.
 
Last edited:
3.5 efi said:
maybe. landowner, the arms are the same profile but they come in two different widths. check the girth where it mounts to the axle. narrow arms have a 24mm nut at chassis mount and the thicker arms have a 30mm nut.
Click to expand...

You sure?

All 3 axles I've had (with wide arms) have been 24mm nuts :confused: . Iirc the wide arms measure 44mm. Someone will correct me if I'm wrong :rolleyes:
 
You must log in or register to reply here.

Similar threads

H
What is this on my defender 110
Replies
11
Views
611
meego
meego
K
First time under a landy
Replies
5
Views
980
Discodevon
Discodevon
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
1K
ChristopherDailey
C
aaronparke1
P38A Disco 2 hubs on a P38
Replies
15
Views
838
pwood999
pwood999
T
Discovery 1 Anti-Roll Bars on a Defender
Replies
3
Views
472
kevstar
kevstar
Back
Top