Disco 3 fiting a snorkel

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Blackdogtrucker

Active Member
Posts
194
Location
Scotland
Hi Guys has anyone fitted a snorkel on a disco 3 iv got one for mine so I can do green roading . The kit looks not to bad to fit but just want to ask first had a look on youtube for a video but nothing any help will do cheers guys
 
If you're serious then there should be plenty of guides online. The instructions should also be reasonably adequate. You need to mention which one you have bought too.
 
Ye Ye I Know but u should see some of the water we go through up here I am not stoping green roading now I have a D3 to much fun my old D2 had a snorkel as the water was bonnet high some times & I`m not about to drown a D3
 
Ye Ye I Know but u should see some of the water we go through up here I am not stoping green roading now I have a D3 to much fun my old D2 had a snorkel as the water was bonnet high some times & I`m not about to drown a D3

Ah apologies, I didnt see where you were! Down here we are lucky if we ever get any more than a couple of inches, although we do have two very good fords.

Have a look around. There must be loads on this one. Best to crack on and ask questions when it goes wrong :D
 
Well that's the snorkel fitted little bit of a ****e to fit 5 holes to drill in the wing :eek: and you have to take out the old air intake pipe which runs inside part of the body and cut part of inner wing :eek: to fit new sealed pipes and another 5 holes to drill for fixing to windscreen pillar but all went well no F##K UPS :amen:
 
Well that's the snorkel fitted little bit of a ****e to fit 5 holes to drill in the wing :eek: and you have to take out the old air intake pipe which runs inside part of the body and cut part of inner wing :eek: to fit new sealed pipes and another 5 holes to drill for fixing to windscreen pillar but all went well no F##K UPS :amen:

No going back :D Glad to hear there were no #### ups.
 
Back
Top