disco 2 wheel bearings

any body attempted disco 2 wheel bearings gratefull for any advice

I understand that you have to get the complete hub assemble. Not done one myself, but I assume that a good bearing man could get you the right part.

thanks getting them from landrover i know they are expensive fancy a go at fitting them myself

the hardes part when i did mine was getting the brake disk off the hub (well stuck) will need a new nut and a good idea to replace the oil seal on the end of the axle if its a front one or a new oring if a rear one
these are the best price for oem hubs Parts and Accessories for Landrover and 4x4
ore these for after market hubs Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order. - Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.
have fitted both types and the cheaper ones seem ok but time will tell the foundry ones are the same part as the dealer but about £60 cheaper (take note that one sit is +vat and delivery and island is included)
www.discovery2.co.uk / Front Wheel Hub / Bearing Assy a good write up here (thanks to urban panzer)

thanks martin that write up is ust the job ill get on with it
thanks