Disco 2 TD5 gearbox help
- Thread starter markr6
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
martinhollings
New Member
- Posts
- 659
- Location
- newark/nottingham
100% no the bellhousing is different and the pinion shaft if different whats wrong with old one
Landybandy
Active Member
- Posts
- 344
- Location
- Neath south wales.
could be the selector! or clutch slave!
martinhollings
New Member
- Posts
- 659
- Location
- newark/nottingham
try this lost 2nd,4th and reverse - LR4x4 - The Land Rover Forum
these are realy helpfull to http://www.ashcroft-transmissions.co.uk/
these are realy helpfull to http://www.ashcroft-transmissions.co.uk/
Last edited:
andymach23
Active Member
- Posts
- 265
What about something as simple as the bias plate broken and the little piece of metal blocking the gates?
Is the gear lever coming to rest between 3rd and 4th as normal or between 1st and 2nd?
If it's the 2nd option it could be just the bias plate. If so the part is a fiver and an hours labour.
Is the gear lever coming to rest between 3rd and 4th as normal or between 1st and 2nd?
If it's the 2nd option it could be just the bias plate. If so the part is a fiver and an hours labour.
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
Before you go rushing in with the time and expense of another gearbox, get the problem diagnosed succesfully.
There are known issues with TD5/R380 especially when the 'box gets warm. It is a very simple and cheap fix.
Use the search engine on here to find loads of helpful threads.
There are known issues with TD5/R380 especially when the 'box gets warm. It is a very simple and cheap fix.
Use the search engine on here to find loads of helpful threads.
