Disco 2 TD5 Cold Missfire

i have a odd missfire when cold
go in the car started up and was running lumpy (missfire)
Drove a little way down the road and the problem was still there, i pulled over and reved the engine , still there. turned the engine off and restarted and the problem was gone?
anyone got any ideas for a quick fix or is it into a stealers
thanks Steve
Watford

hi, have you tried the usual suspects- oil contamination of ecu red plug and injector wiring harness, it could also be a faulty mass air flow sensor,

steveh said:

i have a odd missfire when cold
go in the car started up and was running lumpy (missfire)
Drove a little way down the road and the problem was still there, i pulled over and reved the engine , still there. turned the engine off and restarted and the problem was gone?
anyone got any ideas for a quick fix or is it into a stealers
thanks Steve
Watford

Click to expand...

Steve, if you value your financial security do not take it to a Land Rover dealer, they are looking to build up their holiday money fund right now !!

Your best best is to find someone local to you who has a Nanocom diagnostic so you can track down the problem and fix it yourself.

If you go to the dealers they will go on a swapping spree until they - perhaps - fix the problem. By which time you will have a bill as long as your arm.

Your choice of course.......................

If you go here, you will find some Nanocom users:
www.discovery2.co.uk/ Nanocom Locator, get help from your Land Rover Buddies!!!


Cheers
Dave

Cheers Guys
Im going to look later at the plug and wiring harness
but failing that i'll keep my eyes open for a local garage thats not a rip off
thanks for the advice
steve