disco 2 steering guard install pics
- Thread starter mick1238
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi mate, Sorry I cant help about pictures.... I fitted one to my D2 a few weeks back and tbh, the instructions were next to useless anyway....and it wasn't the easiest of things to do, quite fiddly and a very tight fit etc.
Good luck though
Rob
Urban Panzer
New Member
- Posts
- 610
- Location
- Beds, UK
What ever one you have, you need to fit all the parts "loose" first, otherwise you will most likely find its difficult to get it all lined up.
I suspect you have the same guard my friend has, and the same as Rob above has fitted to. Its easy enough to do, but just take your time.
You "may" find the factory protection bar gets in the way, if it does just remove it as the steering guard is doing a better job anyway.
Its "easiest" to remove the bumper and do it, but you dont have to.
I suspect you have the same guard my friend has, and the same as Rob above has fitted to. Its easy enough to do, but just take your time.
You "may" find the factory protection bar gets in the way, if it does just remove it as the steering guard is doing a better job anyway.
Its "easiest" to remove the bumper and do it, but you dont have to.
Very good point, and certainly worth pointing out....you wouldnt want to put the guard on the wrong way up afterall would you!!
:doh:I'm sure it will.... i'm pretty sure it's just me, I think in future I will leave the tools in the toolbox and get the pro's to do it!
.....Actually, Nah sod that! 
