Disco 2 - retro fitting air suspension

Jimbobs · Feb 21, 2012

Hi everyone, has anybody ever retro fitted air suspension onto a coil sprung (coil sprung from the factory-with 5 seats) disco 2 and what parts would be required. Also is the wiring loom and ecu the same. Looking forward to what people have to say on this one.

xat44 · Feb 21, 2012

have read a few articles on this site about people who have gone back to air after having coils fitted. but none with your set up. from what i gather, the wiring is more than likely in place and the bcu wil just want turning on for sls.
i`m sure a lot more info from those in the know will follow.

defcrazy · Feb 21, 2012

from my experience the wiring is not there for the compressor or the wheel height sensors . so its not as easy as you may think

Jimbobs · Feb 21, 2012

No, I didn't think it would be. I just wanted to know if it had been done and what i would need. Thanks for the reply.

Disco 2 - retro fitting air suspension

Jimbobs

New Member

xat44

Active Member

defcrazy

Active Member

Jimbobs

New Member

Similar threads