Disco 2 parking aid fault

darrenm · Jul 12, 2011

My reverse sensors have stopped working Put it in reverse I get a short bleep and dash board Switch flashes Iv checked sensors ( all clicking) and also bought a new one and swapped them around any idea what else to check

discool · Jul 12, 2011

I understand that all four sensors and their wiring must be ok before the system will work, ie. it won't work on three if one sensor is iffy.
So if there's a beep then the supply is there do it's either faulty sensor head, wiring or the ecu controlling the system.
I believe there is a provision for the ecu to be pluged in to a diagnostic kit to test.

darrenm · Jul 12, 2011

Iv checked the sensors and had the wiring loom out and I cannot see any. Probs il try and find a used ecu

darrenm · Jul 12, 2011

How will I check the ecu

darrenm · Jul 13, 2011

Iv recently changed the xyz switch could that have anything to do with it

darrenm · Aug 10, 2011

Well they don't work at all know but when I put it in reverse I get a constant bleep/tone and flashing bulb on switch

darrenm · Sep 13, 2011

Iv still not them to work it seems like sometimes they do how do u test the ecu

jwac103 · Sep 19, 2012

Hi, did you manage to fix your pdc system?

my system is not working and i was wondering if you had any advice? when i press the binnicle switch on the dash the led within in flashes. i have no tone from the speaker what so ever.

i have just been out to the car to 'test' the sensors and i can confirm they all click when the switch is pressed on.

when i find a way of removing the speaker i will test that. could the fault be the speaker has blown? or is the fault more likely to be with the ecu?

any help will be greatly received,

kind regards

James

Disco 2 parking aid fault

darrenm

Active Member

discool

Well-Known Member

darrenm

Active Member

darrenm

Active Member

darrenm

Active Member

darrenm

Active Member

darrenm

Active Member

jwac103

New Member

Similar threads