Please can any one help me, I know there is a lot of issues with the 3 amigo's coming on and staying on. But I have the opposite, when I turn the ignition to position 2 all the normal warning lights come on apart the 3 amigo's. I can confirm that I have no working ABS or TC and the Hill Descent just gives 3 audible warning tones when I turn it on. Any ideas before I pay a garage mega bucks?
Disco 2 - no ABS, TC or Hill Descent warning light on ignition position 2
- Thread starter Tel-win
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Hi
Did they ever work?
Cheers
Did they ever work?
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Ok,
If i was you I would open the dash to see if some scumbag has taped over rhe lights with black tape. It is quite common. One of the reasons it is a check point on the purchasing check list.
After that I aould look to see if anyone local has proper diagnostics for it. Where are you based?
Cheers
If i was you I would open the dash to see if some scumbag has taped over rhe lights with black tape. It is quite common. One of the reasons it is a check point on the purchasing check list.
After that I aould look to see if anyone local has proper diagnostics for it. Where are you based?
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Not sure what you wrote there.
Cheers
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Very strange, as long as you are sure that the lights / warning symbols have not been blacked out then either look for a local diagnostics if you cN find one or try another dash if you can borrow one.
Cheers
Cheers
Thank you again I will post back on here the results when I finally get to the bottom of it.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Please do let us know how you get on.
Very interesting issue. Never heard of this happening. Have heard of tape over bulbs, even painted black.....
Ref the HDC beeps, mine does this because the hi /lo switch on the tbox has broken. Must get it changed.
Cheers
Very interesting issue. Never heard of this happening. Have heard of tape over bulbs, even painted black.....
Ref the HDC beeps, mine does this because the hi /lo switch on the tbox has broken. Must get it changed.
Cheers
Similar threads
