Disco 1 heated windscreen
- Thread starter moxon508
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,497
For a bonded green screen try Rimmer’s.
https://rimmerbros.com/Item--i-AWR3282
Or
https://www.lrdirect.com/AWR3282-supplied-by-LAND-ROVER-branded-LAND-ROVER.html
https://rimmerbros.com/Item--i-AWR3282
Or
https://www.lrdirect.com/AWR3282-supplied-by-LAND-ROVER-branded-LAND-ROVER.html
Last edited:
Thanks for that. Now that I have the part no. I have managed to find one from a company for under £ 200
frostythor
Well-Known Member
- Posts
- 583
- Location
- NEW FOREST
if your screen is damaged your car insurance will cover the replacement mine was £75 excess fee
- Posts
- 41,328
- Location
- East Dorset
OOPS!
My lump hammer just flew out of my hand!
Funny how i had a duvet on the bonnet to catch it!
There isn't anything wrong with it. I would like to be able to defrost the windscreen barring unkind how crap the heaters are.
- Posts
- 41,328
- Location
- East Dorset
Are you sure it isn't even chipped or cracked?
Really sure?
Or don't you have that sort of insurance!
Really sure?
Or don't you have that sort of insurance!
- Posts
- 41,328
- Location
- East Dorset
Mine as well, makes me wonder if it wasn't designed primarily for LHD!
frostythor
Well-Known Member
- Posts
- 583
- Location
- NEW FOREST
My old on did then slowly over time it reduced until it was just an inch in the centre, when the repairers took it out it was delaminated on the top, so the heater wire had got damp in and just stopped working new one fitted last year works a treat
They are 2 separate circuits with separate relay and fuse so it may be the fuse or relay that has gone.
Beat me to it.
Iirc relays are behind the glovebox, and they or the holders are/were green?
discool
Well-Known Member
- Posts
- 13,497
Not for your 1990MY 200 series disco which has a GA VIN, the windscreen is non-bonded, and if fitted a heated one would have been either BTR742 clear or BTR705 green, best of luck in finding one of those, but the early RR had the similar option.
Last edited:
They are £260 delivered from craddocks.
If it is just 1 element and the defender is 1 element then I cant see a reason why the wiring kit for the defender wouldn't work.
They are 2 separate circuits with separate relay and fuse so it may be the fuse or relay that has gone.
Well I never knew that, thank you very much, I will look into it.
Beat me to it.
Iirc relays are behind the glovebox, and they or the holders are/were green?
Thanks for that, I now have an idea wear to start looking.
Well I never knew that, thank you very much, I will look into it.
Beat me to it.
Iirc relays are behind the glovebox, and they or the holders are/were green?
Thanks for that, I now have an idea wear to start looking.
I think screen conectione were under wiper panel each side, so could be as simpel as coroded connector.
As its a 200 pretty sure they had fusible links for various circuits, so it might not have what we would call normal fuses.
