Disco 1 Cornwall
- Thread starter Will78
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
Good solid towing points fore and aft
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
Yeah. None (or maybe some better tyres, depending on whats on there).
Where are ya?
Where are ya?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
and another landy to go with
and some good strong ropes & shackles
and some half decent tyres.
anything else is bling.
and some good strong ropes & shackles
and some half decent tyres.
anything else is bling.
Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
Just make sure you empty the Disco before you cross the Tamar. We don't accept coloured beads, glass and baubles as currency in Devon anymore.
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
How about a night with someone else's sister
Oh no, hang on, princetown...yer not gunna be interested are ya??
Dartmoor Navigator
Well-Known Member
- Posts
- 5,899
- Location
- Dartmoor
:d:d:d
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
DO NOT FIT A LIFT KIT!
You don't need it and it will lead to a world of pain and expense.
Diff guards can be useful but can also trap muck and water, leading to premature rust failure of the diff pan.
You don't need it and it will lead to a world of pain and expense.
Diff guards can be useful but can also trap muck and water, leading to premature rust failure of the diff pan.
bobbler
New Member
- Posts
- 2,773
- Location
- County Durham
if your really concerned then a couple of diff guards can be had pretty cheaply but make sure you take them off and clean after use otherwise like trewy says they will trap crap and rust your diff pans.
wouldnt bother with a lift unless you really need it.
why not just find someone to go out with and im sure you will be surprised what a standard disco can do with a decent set of rubber
:welcome:
wouldnt bother with a lift unless you really need it.
why not just find someone to go out with and im sure you will be surprised what a standard disco can do with a decent set of rubber
:welcome:
Just make sure it has some decent all terrain tyres on it (Or mud terrains if you don't plan on doing much normal road driving) and take it along some green lanes, get a feel for both the car, and your capabilities. Once you've got that, you will have more idea of what you want in order to cater for your needs. Otherwise, you risk wasting money on things you may never need.
landy1uk
Well-Known Member
- Posts
- 1,775
- Location
- Hertfordshire
:welcome2:what ^^^^^^everyone else says^^^^^^
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
Do you enjoy replacing wheel bearings?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
go for spacers then a lift kit then 35" tyres,,sorted
dont listen to others there just sore cos there landys fell to bits when they done mods.
dont listen to others there just sore cos there landys fell to bits when they done mods.
bobbler
New Member
- Posts
- 2,773
- Location
- County Durham
who told you that? spacers are around £180 and a new set of wellers/modulars would cost around £120 and put less stress on your bearings.
tbh just try adjusting the lock stops
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
Dunt listen to em - it's a myth - spacers will have no noticeable bearing on your bearings ( ) and why should they? Go for it. It's just the anti mob at it! They are a bit bling and will make yer motor look a bit meaner but why the hell not!
Oh...if the wheels project beyond the wheel arches it will fail an MOT though.
) and why should they? Go for it. It's just the anti mob at it! They are a bit bling and will make yer motor look a bit meaner but why the hell not!Oh...if the wheels project beyond the wheel arches it will fail an MOT though.
Similar threads
