Defender wont start Td5

cwc · Feb 14, 2010

Hi
i have a problem with a defender TD5 2000
i changed the fuel filter on it non gen one it would not bleed no matter what i did.
i then put a gen filter on it did the bleed process started 1st time fixed i thought. did about 15 miles then just cut out now wont start at all.
Any one got any ideas
also does anyone know a good independant LR garage in Leicestershire
Cheers David

ratty · Feb 14, 2010

cwc said:
Hi
i have a problem with a defender TD5 2000
i changed the fuel filter on it non gen one it would not bleed no matter what i did.
i then put a gen filter on it did the bleed process started 1st time fixed i thought. did about 15 miles then just cut out now wont start at all.
Any one got any ideas
also does anyone know a good independant LR garage in Leicestershire
Cheers David

what did you try and do to bleed it? did you fill the old and new filters with fuel before fitting em?

cwc · Feb 14, 2010

Yep filled them up with fuel the it went though it purge cycle then away it went i used it yesterday. it started 1st time today ran for a few miles then gave up
David

ratty · Feb 14, 2010

cwc said:
Yep filled them up with fuel the it went though it purge cycle then away it went i used it yesterday. it started 1st time today ran for a few miles then gave up
David

sometimes you need to do the purge cycle several times over.

It could have had one of the seals mising, it could have had a loose water drain valve, it could be a dodgy filter. It wasn't a britpart filter was it?

Can you hear the fuel pump working now it's not starting? Is it more noisey than usual? does it sound like it's gurgling?

cwc · Feb 14, 2010

yep pumps running and sounds normal all the seals in place and a gen filter

ratty · Feb 14, 2010

cwc said:
yep pumps running and sounds normal all the seals in place and a gen filter

sounds like you might want to try running the purge process several times in a row.

I've had it need to be done 8 times on my landy before now.

cwc · Feb 14, 2010

As i said it has been running since the filter change for about 15 miles then gave up
David

ratty · Feb 14, 2010

cwc said:
As i said it has been running since the filter change for about 15 miles then gave up
David

it could have had a big chunk of ****e from the filter shift (especially as you removed it and then re-fitted it). It could be an air pocket that was missed while purging. Double check the fuel cut off switch while yer at it.

cwc · Feb 24, 2010

Well it does no (start that is)

their were quite a few things wrong with it

A small amount of oil in the ECU Plug new harness fitted

The Autologic said 4 out of the five injectors had faults and would not clear the mech had to reprogram the injector numbers in again not a clue why

It seemed the main problem to our tale of woe was a bad earth to the ECU and a few other bad earths on the truck

It also had a ceased wastegate that would explain the miss fire when giving it the big foot

and a totaly gunged up EGR valve need to get rid of that asap

Any way its a runner now

so if you are looking for a mechanic on NW Leicestershire give Will at Infield Landrover a try good lad and owns a old TD5 110
Thanks for your help guys
Cheers David

Defender wont start Td5

cwc

New Member

ratty

I'm not special I'm limited edition

cwc

New Member

ratty

I'm not special I'm limited edition

cwc

New Member

ratty

I'm not special I'm limited edition

cwc

New Member

ratty

I'm not special I'm limited edition

cwc

New Member

Similar threads